Achieve perfect alignment when fabricating pipe work with our Flange Leveling Pins. Designed to simplify the leveling process. Simply insert the pins into the flange holes and place your level on top. It's that straightforward! No more struggling to achieve the right alignment when working with flanges. These pins...
Achieve perfect alignment when fabricating pipe work with our Flange Leveling Pins. Designed to simplify the leveling process. Simply insert the pins into the flange holes and place your level on top. It's that straightforward! No more struggling to achieve the right alignment when working with flanges. These pins...
UK Mainland delivery between 22/05/2026 to 26/05/2026
Introducing our Tube Clip Tacking Jig, the perfect tool for streamlining the tacking process when working with multiple tube clips. No more guesswork when it comes to tacking on the round bar – our jig takes the uncertainty out of the equation. Designed to accommodate tube clips ranging from 1'' to 6'',
Polly Panel wall punches are designed to make ease of putting holes through refrigeration panel's so that you can then hole saw your way through. Punch pin is 6mm same as your whole saw mandrill. Suitable for up to 175mm thick panels.
UK Mainland delivery between 22/05/2026 to 26/05/2026
Are you constantly welding in position and seeking to up your welding game? Look no further than our Manual Welding Rotator, designed to give you the edge in welding precision. This versatile tool provides full control over the parts you're welding, allowing you to achieve flawless results. Whether clamped securel...
Introducing the SsCustom Weld Cleaning Machine, your go-to solution for adding the perfect finishing touch to your welding projects. Say goodbye to the hassles of traditional pickling paste, which could stain your work. Our innovative machine is here to revolutionize the way you achieve that flawless, clean look. ...
UK Mainland delivery between 22/05/2026 to 26/05/2026
The Facing Disc Kit comes with 4” 5” and 7” Aluminum backing plate to be used with flat sanding discs. These are compatible with the same size angle grinders. The solid backing plate allows for facing of tube or pipe to the desired square level edge that we are all after. Included are brass nuts to avoid the scrat...
UK Mainland delivery between 22/05/2026 to 26/05/2026
The laser tree fits 6 sizes (4” 3” 2.5” 2” 1.5” 1”) it will fit lasers with 5/8” thread. The tree is used to attach to your laser and sit inside a tube usually facing upward. The laser is then turned on and accurate measurements can be made for heights and center lines of that tube. The shaft can also be removed a...
UK Mainland delivery between 19/06/2026 to 23/06/2026
Unlock new possibilities with our Tab Kit, designed to enhance your Pipe Vice and provide additional clamping flexibility. This kit allows you to double your clamping capacity and easily adjust the placement of the clamp based on your specific welding needs. Easily attaches to your Pipe Vice for expanded clamping ...
