TIG Torch Adaptor 35/50 to 3/8 BSP to Quick Release Fitting
4.88/5
CODE
SP-D3595-1-QD
In stock
Order in for UK Mainland delivery between 15/07/2025 to 16/07/2025
TIG adaptor with quick release to convert 3/8 BSP Tig Torch
- 3/8 BSP Gas/Water Nut Fitting
- Quick release fitting male
- Cable length: 0.5 Mtr
- Shaft size 12.7mm
- For converting 3/8 BSP nut fitted torch to 35/50 plug with quick release gas/water

Excellent
TIG Torch Adaptor 35/50 to 3/8 BSP to Quick Release Fitting
product reviews
141
product rating
4.88/5
product experience
calculated from 141 customer reviews
positive
97%
Neutral
3%
negative
0%
latest reviews
-
Decent product reasonable price
-
Another quality item
-
5/5
-
Good adaptor
-
Quality is good.
-
Excellent as always!
-
Have not used it yet but looks good
-
I'm glad I acquired a CK TL26 4M Air Cooled TIG Torch with Flexi Head. It's so much easier to work with than the one that came with my R-Tech TIG welder, which is fine for starting out but is rather cumbersome. It felt like trying to manipulate a dead snake with rigor mortis setting in. The CKTL26 is lighter and more flexible, allowing you to concentrate on welding, and you can hold it like a pen because it's slim.
-
works well good quality
-
Good quality equipment again.
-
Great product and easy set up
-
Worked perfect. !!
-
Fantastic product and service
-
Great service and advice, fast delivery. Very nice product.
-
Great little adapter.
-
Perfect product
-
Perfect
-
Excellent quality
-
Great product, easy to fit, a nice addition to my TIG setup.
-
fine
-
Easy to use
-
excellent
-
I recommend this product.
-
Very good item, only bettered by the customer service which was excellent, as always
-
Tig Friends Good quality
-
Great
-
Does what it says but a star knocked off as the quick connect gas fitting was a poor fit and required some fettling to lock in
-
Enabled me to use a smaller torch which I already owned. Adapter was spot on
-
The dinse adapter was purchased to use a ck torch with my new Rtech 170 ac/dc tig welder. However the adapter was 5mm longer than the item supplied with the new welder and needed to be cut to fit.
-
good value
-
Fits the torch very well, and good value
-
Great products
-
Used for adapting my new torch for Tig welding, I recommend *** to everyone Good quality as usual
-
does what it should
-
Does what it says on the tin
-
Well made
-
Works
-
Good, easy to use product.
-
Perfect
-
Required accessory for using CK torch with R-tech TIG welder. One negative is that the ** where the gas connects to the main hose points to the ground when the connector is secured, which makes it too much bent/stressed when the welder is on the ground. Eeasy fix to to put something under the welder.
-
Perfect product to connect my new CK worldwide tig torch to my existing set up.
-
Good quality does exactly what it says and helped me fit my new torch with ease
-
Very good highly recommend
-
Excellent. First class.
-
Looks excellent
-
***
-
This device as advised worked perfectly allowing me to connect the CK9 torch with my R-tech 160 TIG welder.
-
Quality product
-
Seems well made, good tight fit, well worth the money
-
Does the job
-
Great quality I would recommend for users of jasic Tig welders which require the use of dinse adapters
-
Good product
-
Perfect for my AC/DC 161 tig. Easy to fit to my ck torch 👍🏻
-
Good quality, easy to use. Quick set up.
-
Nice product, fits well, no leaks and reasonably priced. Win.
-
Does what it should
-
It does the job
-
It’s quality bit of kit
-
DIY friends very good
-
As described, works well, good quality.
-
Good equipment
-
Cant Recommend Enough
-
Used to adapt a CK 9 torch to my TIG 161 acdc machine. Spot on adapts power and gas very easilly to this torch.
-
It does what it says !
-
Have not received my product yet but looks great!
-
Good
-
got a ck torch
-
Good quality kit, prompt delivery
-
Recommend product to who ever needs the adapter good quality
-
as described
-
Fair price. Good delivery time. Straight fit to a jasic TIG welder - ideal
-
Quality good
-
Good quality product
-
as described good product
-
Does what it says on the tin, don’t see the point in spending extra for the CK one. I had to cut the quick release fitting off and install a different one to fit my welder’s gas outlet, but this was easy.
-
Great
-
Great product fitted my r-tech Tig AC,DC,210 with no problem. 👍👍.
-
Not much to say about this one other than it appears to be nicely made and fit perfectly between the machine and the CK torch.
-
First class quality and fitted my welder and torch combo precisely
-
not used yet.
-
Product exactly what it is meant to do at a good price.
-
Product exactly what it is meant to do at a good price.
-
Great product would recommend 100%
-
Great product would recommend 100%
-
easy to use and set up with new ***, quality is very good, plug and play not touched since installation, build quality very very good
-
easy to use and set up with new ***, quality is very good, plug and play not touched since installation, build quality very very good
-
Does what it should, could have done with a longer water cooler hose on it
-
Does what it should, could have done with a longer water cooler hose on it
-
Item ok
-
Item ok
-
Nice construction.
-
Nice construction.
-
Very good value for money, does the job well of connecting a CK Worldwide WP9 torch to one of R-Tech's Tig 161 machines.
-
Very good value for money, does the job well of connecting a CK Worldwide WP9 torch to one of R-Tech's Tig 161 machines.
-
Fits my machine and very good value for the price.
-
Fits my machine and very good value for the price.
-
Great and reasonably priced
-
Great and reasonably priced
-
*** what it says
-
*** what it says
-
Works well
-
Works well
-
Good
-
Good
-
Good value.
-
Good value.
-
Easy and does what it's supposed to do. Saved me a headache. The quality is nice.
-
Easy and does what it's supposed to do. Saved me a headache. The quality is nice.
-
Would recommend the product even for the hobbyist as it makes the whole process of welding easier coupled with the known quality that r tech provides.
-
Would recommend the product even for the hobbyist as it makes the whole process of welding easier coupled with the known quality that r tech provides.
-
The tech team advised me to what I needed to suit my welding machine that I am using for hobby pursuits ( motorcycle building) I would recommend R -tech tig to friends and colleagues.
-
The tech team advised me to what I needed to suit my welding machine that I am using for hobby pursuits ( motorcycle building) I would recommend R -tech tig to friends and colleagues.
-
Seems good quality and does what it’s supposed to. Was a little stiff when first fitted but soon freed up.
-
Excellent quality adapter that fits and works a treat on the R-tech machines. Highly recommended.
-
Does the job but not the best. The machining on the *** *** that plugs into the machine doesn’t allow it to lock in properly so it can come out. Some fettling with a file should sort it.
-
Good price and quality.
-
fitted to save time and trouble dis/connecting my tig cable on my RTech tig machine. very good quality part .Useful to any tig welder who moves and stores set in pieces.
-
Very lightweight and flexible cable needs good connections, and this is it.
-
All as advertised - very happy with product and would reccomend.
-
excellent
-
Need to work this one out, does not initial fit with out a bit of playing with to work out how, the standard torch fit straight in, this one gives you a question mark will it, until you work it out. 5* if I had the warning or it just fitted. lubed the back plastic then now problem.
-
Dose what it's meant too
-
Good quality, reasonable price.
-
Spot on
-
used to fit CK superflex hose & torch to Dinse output, Anyone with the same setup Rubber insulation was too big & it wouldn't fit in the Dinse connector - filed rubber & modified to fit - now works well!!
-
good quality adapter. fits straight to my jasic TIG machine without modification!
-
Great item, fits well.
-
Great quality.
-
home workshop use. Supplied with a new CK flex head No 9 torch kit and does exactly what it should.
-
Used to convert CK9 torch to R-Tech TIG welder with quick release gas fitting, good product.
-
Good product
-
All OK works
-
Used to adapt my little dc inverter welder to take a 3/8bsp ck9 torch. Works a treat.
-
Much more affordable ***
-
Needed for my R-Tech Tig welder to connect an additional torch. Nice product, good price.
-
Top quality at a great price.
-
recommend to all ,quality very good ,
-
Does the job perfectly
-
I was recommended this product by the staff at R-Tech as a cheap, reliable alternative to the CK equivalent. It saved me £*** and does the job perfectly on my SIP 215P
-
Great adapter when you need one. Well assembled with good fittings.
-
Mike assisted in heloing me update a pre 2014 machine, kit fit very well! Allows me to run my ck9 torch, very happy!
Guide
25 Minute read
Article
10 Minute read
Article
10 Minute read
Video
25 Minute viewing