Mac Hobby - Modular Fixture Welding Table - 1200 x 800mm

The perfect table for the hobbyist & beginners to join us in the world of fixture table fabrication. All parts are 6mm HRPO S275 Steel which when assembled correctly you have a truly flat and accurate surface.

Unlike other imports and cheap constructions MAC design superior sub-frame cross bracing as this is the most critical part of the fixture table to ensure a truly flat and accurate surface. MAC design, test and manufacture everything in house and the UK to maintain a high quality of control.

All MAC tables and tooling include the industry standard 16mm hole pattern (50mm hole centres) this works with all industry fixture 16D tooling.

MAC use Hot Rolled, Pickled and Oiled S275 structural mild steel. What this means is just after the production the sheet steel is run through an acid bath (pickling) to remove any impurities, rust and mill scale from the surfaces of the steel. This leaves the sheet raw and unprotected so a light coving of oil is used to protect it.