Baileigh RDB-25 Manual Tube Bender
CODE
TF-BA-RDB-25
In stock
The RDB-25 manual tube bender is the perfect machine for those hobbyists that need to bend tube on a budget. It is made from a sturdy cast iron frame and can be bench or pedestal mounted. The RDB-25 from Baileigh Industrial was designed to bend the most common sizes of tubing on safe centerline radii to ensure great looking bends.
- 8 included die sets
- From 9.5mm to 22.3mm Ø round tube
- 19.1mm & 25.4mm square capacity
- Manual Operation
- Also included is a handy carry case, which allows the bender to be stored when not in use
This manual tubing bender comes standard with the following round tube die sets:
- 3/8" OD x 2" CLR (9.5mm OD x 51mm CLR)
- 1/2" OD x 2.25" CLR (12.7mm OD x 57mm CLR)
- 9/16" OD x 2.5" CLR (14.3mm OD x 64mm CLR)
- 5/8" OD x 3" CLR (15.8mm OD x 76mm CLR)
- 3/4" OD x 3.5" CLR (19.1mm OD x 89mm CLR)
- 7/8" OD x 4.25" CLR (22.3mm OD x 108mm CLR)
- 3/4"" Square x 3.75"" CLR (19.1mm Square x 95mm CLR)
- 1" Square x 4.25" CLR (25.4mm Square x 108mm CLR)
5022
Guide
25 Minute read
Article
10 Minute read
Article
10 Minute read
Video
25 Minute viewing