Plasma Cutter Cebora Prof 162 [Welding Equipment > Plasma Cutter > Plasma Cutter Cebora Prof 162]
	Plasma Cutter Cebora Prof 162 The Cebora Prof 162 Plasma Cutter is a 160Amp 415V Plasma Cutter with a Massive 40mm Clean Cut, Ideal for Industrial cutting. Complete with 6M Plasma Cutting Torch and Accesories.  Input Voltage 400V 50/60 Hz Maximum Installed Power kW 22.0 Input Power kVA 22.0 @ 60% Current Range 20 - 160A Duty Cycle (10 Mins/40C) 120A @ 60% Stepless Regulation Electronic Cutting Capacity On Steel 40 mm Plasma Torch Length 6 Mtr Air Consumption 220 Ltr/Min 5.0 Bar Protection Class IP 21C S Class Free Delivery to UK mainland 12 Months Warranty Cover Free 'on-site' demonstration available
		£4773.00 +V.A.T. ( £5608.28 inc V.A.T) ( EUR 5,253.88)   Product code: ZX952
[Welding Equipment > Plasma Cutter > Plasma Cutter Cebora Prof 162]

(Carriage charge advised in checkout before payment details entered)

Plasma cutting is a process that is used to cut steel and other metals using a plasma cutter.

In this process, compressed air is blown at high speed out of a nozzle; at the same time an electrical arc is formed through that air from the nozzle to the surface being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut.

As they only require electricity and compressed air to run they are a very efficient and easy means of cutting metals. Plasma Cutters use consumables in the end of the torch, normally these are: an electrode to carry the current, a cutting tip and a ceramic cup to encase the electrode and the cutting tip.

Clean cut means the cut metal would require no or little cleaning before being used, this is used normally when items are to be welded etc.

Severance cut means that the metal will be cut through all the way but the bottom part of cut metal would need to be cleaned up if required to be welded etc, Severance cut is normally used for cutting up scrap materials to be disposed of.